本特利330180-51-00和330180-51-05汽輪機振動監測系統前置器

產品詳情資料

330180-51-00和330180-51-05本特利DIN安裝振動監測前置器，屬于本特利3300XL8mm電渦流傳感器配套產品，用于監測機械的振動，為Bently Nevada產品， 線性范圍為2mm，頻率響應范圍0-10kHz，靈敏度為為7.87V/mm，以位移量um為單位，X/Y方向安裝，更詳細信息參見本特利中國。測量原理是通過探頭端部與被測物體間的間隙變化來測量振動和靜位移。常用于監測發電廠、鋼廠、化工廠等企業的汽輪機、風機、壓縮機、水泵和電機等的振動監測。

以下規格適用于 3300 XL NSv 前置器、延長電纜和探頭 

在 0°C 和 +45°C（+32°F 到 +113°F）之間，使用 -24 Vdc 電源、10 kΩ 負載、Bently 

Nevada 提供直徑為 31 毫米（1.2 英寸）或更大的 AISI 4140 鋼靶，以及一個探針間隙 

1.0 毫米（40 密耳）。系統精度和互換性規范不適用時 

使用針對本特利內華達 AISI 4140 鋼目標以外的任何目標校準的換能器系統。

3500/06,3500/08,3500/15,3500/20,3500/22M,3500/25,3500/32,3500/33,3500/34,3500/40M,

3500/42,3500/65 184469-01, 3500/44M, 3500/45, 3500/46, 3500/50, 3500/53, 3500/60, 3500/61, 

3500/62, 3500/64M, 3500/65, 3500/70M, 3500/60, 3500/65,3500/72M,3500/77M, 3500/90, 

3500/33, 3500/33 149992-01, 3500/33 149986-01, 3500/53, 3500/53 133388-01, 3500/53 133396-01, 

3500/65 184522-01, 3500/92, 3500/92 136180-01, 3500/92(136180-01), 3500/15 125840-01, 

3500/15 133300-01, 3500/15 127610-01

英文產品詳細信息

330180-51-00 and 330180-51-05 Bently DIN mounted vibration monitoring proximitors are a supporting product of Bently 3300XL8mm eddy current sensors used to monitor mechanical vibration. They are Bently Nevada products with a linear range of 2mm, a frequency response range of 0-10kHz, and a sensitivity of 7.87V/mm. They are installed in the X/Y direction with displacement um as the unit. For more detailed information, please refer to Bently China. The measurement principle is to measure vibration and static displacement through the change in gap between the probe end and the measured object. Commonly used for monitoring the vibration of steam turbines, fans, compressors, water pumps, and motors in power plants, steel mills, chemical plants, and other enterprises.

The following specifications apply to the 3300 XL NSv Proximitor, Extension Cable, and Probe

Between 0 ° C and+45 ° C (+32 ° F to+113 ° F), use a -24 Vdc power supply, 10 k Ω load, Bently

Nevada offers AISI 4140 steel targets with a diameter of 31 millimeters (1.2 inches) or larger, as well as a probe gap

1.0 mm (40 mils). When system accuracy and interchangeability specifications are not applicable

Use a transducer system calibrated for any target other than the Bently Nevada AISI 4140 steel target.

3500/063500/083500/153500/203500/22M, 3500/253500/323500/333500/343500/40M,

3500/423500/65 184469-01, 3500/44M, 3500/45, 3500/46, 3500/50, 3500/53, 3500/60, 3500/61,

3500/62, 3500/64M, 3500/65, 3500/70M, 3500/60, 3500/653500/72M, 3500/77M, 3500/90,

3500/33, 3500/33 149992-01, 3500/33 149986-01, 3500/53, 3500/53 133388-01, 3500/53 133396-01,

3500/65 184522-01, 3500/92, 3500/92 136180-01, 3500/92 (136180-01), 3500/15 125840-01,

3500/15 133300-01, 3500/15 127610-01

免責聲明：

AMIKON我們銷售新產品和停產產品，獨立渠道購買此類特色產品。阿米控不是本網站特色產品的授權分銷商、經銷商或代表。本網站上使用的所有產品名稱/產品圖片、商標、品牌和徽標均為其各自所有者的財產。帶有這些名稱,圖片、商標、品牌和徽標的產品描述、描寫或銷售僅用于識別目的，并不表示與任何權利持有人有任何關聯或授權。